Share a photo or story of your ‘unsafe’ steps to #rvstepfail for a chance to win prizes!
For those that have experience with typical RV steps you know they are at best challenging to work with and far less safe while entering and exiting an RV.
The gap from the last step of your RV to the ground is commonly much higher than the typical rise in RV steps. To fix this issue, some folks take matters into their own hands. Often people purchase collapsing stool steps or improvise with a jury-rigged platform to put underneath to shorten the gap in step rise.
Another challenge occurs when parked on a swell or a small hill that will not allow the bottom step to fold out requiring a shovel to dig out a place for the step to deploy. For those that have difficulty with mobility, the step configuration becomes a significant challenge.
Almost all RV steps are made from steel and are susceptible to rust which leads to seized steps and hinge failures.
We want to see these #rvstepfails or step stories that you see while camping. If you or someone you know has ever come up with a creative way to fix this step issue, send us your pictures and stories on our Twitter feed @Torklift or by clicking here to email.
You will be netered into a montly drawing for a chance to win prizes!
View our gallery of RV Step Fails below and submit your own Step Fail using #rvstepfail:
RV Step Fail Blog
One small step for me; one giant step for the wife...
One small step for me; one giant step for the wife! I was reading a year old issue of Trailer Life Magazine last night and saw your ad for the steps. This is the first time that I have gone online to your website. More than a decade ago, I made an appointment and drove from Spokane to Kent to have you weld your camper mounts on my 97 Dodge. I could feel the improvement over my unhappy jacks within the first 1/2 mile!
You guys keep coming up with new products that are the best that can be bought!
In Feb. 1997, I ordered both the Dodge and a Bigfoot 10.6 basement camper as our pre-retirement package. Because of the extra height, the camper came with 5 steps made by a small company in Kelowna, B.C. From day 1- no matter how I stretched, leveled, or set those steps, every one was at a different angle. I contacted the builder, and he sent me an upgrade at no additional charge. All of the side pieces are made in the same jig, and there was no improvement. A local RV supply business said that they had seen this before; and they were made wrong. I am better at math than most, and following the basic laws of trig, I can't see what's wrong (equal sides yield equal angles). Only the middle step is level- each step up ore down is off by about 5-10 degrees, compounded with each step. The top one is like a ski jump, and the bottom one is an ankle buster. To make things even worse, every pivot is a fully threaded 1/4" coarse thread grade 5 bolt. At least three of these have snapped over the years.
My wife is afraid to continue to use these steps. According to the license tabs, it hasn't moved since 2008. By chance I met an identical owner at Fred Meyer in Yakima last year; same brand of steps on his newer Bigfoot- SAME PROBLEM. It sounds like you guys have made something that will really improve our situation.
GlowStep Revolution Features
- Only RV step system with 7 inches of vertical step elevation adjustment
- Unparalleled stability eliminating the unsafe diving board effect
- Earth to RV: Brings step to ground level (No more unsafe booster step)
- Landing gear quickly levels on uneven terrain (included)
- Step system accessories: Handrail, pet safety barriers and shoe cleaning attachment
- Made from lightweight aircraft grade aluminum (rust free)
- Works on side entry truck campers and towables
- Bushing bearing bolted for maximum stability and longevity
- Glows in the dark for up to 10 hours with only five minutes of light exposure
- Secures into place via locking mechanism
- Legendary Lifetime Warranty
- Proudly made in the USA